Description
The new sliding bread box! The sliding top keeps bread and pastries fresh for longer.
[FX] Slides in limited supply
| What's Included:
� Custom Pullout Shelf � Complete set of the selected Slides � Mounting Hardware for the selected Mounting Style � 1 or 2 Door Protectors per shelf (under 19" wide gets 1) � 10 Wood Mounting Screws per shelf (5/8" long) |
Clear Opening Width
The available space between the most narrow 2 points of your cabinet's opening, at the level the shelf will be installed. Between any protruding hinges, doors, face frames, etc.
It is typical for the lower pullout shelf to be slightly narrow that the upper, due to the hinges usually only interfering with the bottom. If you have a Frameless Cabinet,
you may need to deduct for the L Brackets used by the Base or Half Shelf Mounting Styles.
Do not measure existing pullout shelves or drawers to obtain the Clear Opening Width
Shelf Depth
Select the Shelf Depth that would fit inside of your available cabinet interior depth, behind any doors or framing. This is the actual length of the pullout shelf. The Rear Socket Mounting Style
may add 1/4" more to the Shelf Depth selection, so please allow for 1/4" Extra room when ordering to be safe.
Do not select the Depth size larger than your interior cabinet depth.
Mounting Styles
| Base Mount | Mounting on top of any existing surface, i.e. Bottom/Floor of cabinet, Full Fixed/Adjustable Shelf. |
| Half Shelf Mount | Utilizing the pesky Half Shelf in the back of the cabinet, or an existing shelf that's more than 2" shorter than the cabinet depth. |
| Side Mount | For mounting an upper shelf with no existing fixed/adjustable shelf. Would attach to the interior sidewalls using a form of Spacer or Wood Strip so the pullout can be narrow enough to slide through the opening. |
| Rear Socket Mount | Similar to the Side Mount, only the Rear of the shelf will be attached to the cabinet's back wall. |
| The Half Shelf, Side Mount, and Rear Sockets Mounting Styles all attach to the Face Frame or Sides of the cabinet on the front, the rear attachment is all that changes. | |
We do not automatically include spacers. They can be found in our Hardware Section
You can find more information on our different Mounting Styles HERE.
You can find more information on our different Mounting Styles HERE.
[FX] Slides in limited supply
Your shelf is custom made to order in the USA usually ships in 1 - 2 weeks.
FREE U.S. Shipping Custom Shelf Orders Over $750 *
Excludes HI & AK
| Specifications | |
| Height | 7 3/8" |
| Depth | From 11 3/4" to 25 3/4" (2" increments) |
| Capacity | 100 lbs. |
| Wood | 1/2" 9-Ply Birch sides / 1/4" MDF bottom |
| Finish | 2-Coat Clear Lacquer Finish |
| Joints | Rabbet corners / Dado bottom |
| Warranty | Lifetime / 5 Years with [BB] Full Extension slides ** |
If you have any questions on measuring, mounting, or ordering please emails us at [email protected] or call us at 1-800-598-7390
4.95/5 Stars out of 21 Reviews
0
0
0
1
20
Russ | February 27th, 2018
Put your shelves in this morning and they look and work great. Simple installation, well constructed and you folks did a good job of UPS proofing your packaging (one corner of the shipment took a good hit, but the shelves were not harmed). Very little wasted space in the cabinet and they slide effortlessly and stop on a dime. Really glad I found you folks online and I will proudly recommend you to my friends who are looking to make their life in the kitchen easier.
Write A Review
