Introducing our new Side Mount Hole Drilling Jig. Made specifically to match the front-to-back hole spacing on the Standard 3/4 Extension, and Ball Bearing Full Extension Soft-Close slides we offer.
● Fits 3/4 Extensions Slides from 16" to 22"
● Fits Ball Bearing Slides from 18" to 24"

Kit includes one Wooden Hole Jig, and one 5mm Diameter - Depth Limiting Drill Bit.

Always Check Sidewall Thickness Before Drilling

The drill bit features a plunger that limites the depth so the hole does not protrude through the cabinet sidewalls. The tip of the plunger fits snug into the holes on the Hole Jig to ensure the drilled hole is perfectly centered.
Clear instructions are engraved into each side of the Hole Jig for Left & Right application.

Instructions

Left Side:
With the "L" facing out, and "Front Hole" forward, place the jig on the Left Interior Wall of the cabinet, up to the back end of the Face Frame or Front Edge (Frameless Cabinets) of the Cabinet, at your desired height. Using the provided Drill Bit, make your first hole in one of the A Column holes (i.e. Bottom Hole). Next, drill another (bottom) hole in the Column that matches the slides your have.
Right Side:
With the "R" facing out, and the "Front Hole" forward, mirror the jig's placement from where it was on the Left Side and also match the same height. Repeat the hole drilling process in Column A and the corresponding Column that matches your slide.