Help Guides, Measuring Guide, Measuring Form |
Description
When you need a little height, our medium high shelf does the trick. Great for boxed foods in pantries, or if you just want to keep your plasticware more contained.
[FX] Slides in limited supply
What's Included:
• Custom Pullout Shelf • Complete set of the selected Slides • Mounting Hardware for the selected Mounting Style • 1 or 2 Door Protectors per shelf (under 19" wide gets 1) • 10 Wood Mounting Screws per shelf (5/8" long) |
Clear Opening Width
The available space between the most narrow 2 points of your cabinet's opening, at the level the shelf will be installed. Between any protruding hinges, doors, face frames, etc.
It is typical for the lower pullout shelf to be slightly narrow that the upper, due to the hinges usually only interfering with the bottom. If you have a Frameless Cabinet,
you may need to deduct for the L Brackets used by the Base or Half Shelf Mounting Styles.
Do not measure existing pullout shelves or drawers to obtain the Clear Opening Width
Shelf Depth
Select the Shelf Depth that would fit inside of your available cabinet interior depth, behind any doors or framing. This is the actual length of the pullout shelf. The Rear Socket Mounting Style
may add 1/4" more to the Shelf Depth selection, so please allow for 1/4" Extra room when ordering to be safe.
Do not select the Depth size larger than your interior cabinet depth.
Mounting Styles
Base Mount | Mounting on top of any existing surface, i.e. Bottom/Floor of cabinet, Full Fixed/Adjustable Shelf. |
Half Shelf Mount | Utilizing the pesky Half Shelf in the back of the cabinet, or an existing shelf that's more than 2" shorter than the cabinet depth. |
Side Mount | For mounting an upper shelf with no existing fixed/adjustable shelf. Would attach to the interior sidewalls using a form of Spacer or Wood Strip so the pullout can be narrow enough to slide through the opening. |
Rear Socket Mount | Similar to the Side Mount, only the Rear of the shelf will be attached to the cabinet's back wall. |
The Half Shelf, Side Mount, and Rear Sockets Mounting Styles all attach to the Face Frame or Sides of the cabinet on the front, the rear attachment is all that changes. |
We do not automatically include spacers. They can be found in our Hardware Section
You can find more information on our different Mounting Styles HERE.
You can find more information on our different Mounting Styles HERE.
[FX] Slides in limited supply
Your shelf is custom made to order in the USA usually ships in 1 - 2 weeks.
FREE U.S. Shipping Custom Shelf Orders Over $750 *
Excludes HI & AK
Specifications | |
Height | 4 7/8" |
Depth | Select [FX] or [BB] for extra depth choices |
Capacity | 100 lbs. |
Wood | 1/2" 9-Ply Birch sides / 1/4" MDF bottom |
Finish | 2-Coat Clear Lacquer Finish |
Joints | Rabbet corners / Dado bottom |
Warranty | Lifetime / 5 Years with [BB] Full Extension slides ** |
If you have any questions on measuring, mounting, or ordering please emails us at [email protected] or call us at 1-800-598-7390
4.87/5 Stars out of 118 Reviews
0
0
0
15
103
Lori | September 17th, 2014
My beautiful premium shelves have just been installed and they are wonderful! My contractor recommended you, and I am so glad he did. I used to open my pots and pans cupboard and stuff would just fall out, and I had to get on my knees to sort through the back of it.
Anonymous | April 24th, 2018
I just wanted to let you know that the shelves installed perfectly. They were made well and exactly to specifications and I received them earlier than I expected! These sliding shelves are just what I wanted for storing my CDs. They look great and I have recommended your company to others.
Liinda | August 10th, 2019
For many years I wanted a new flat screen TV but I could not fit one into my beautiful old TV armoire. I was unwilling to give up my old armoire so I bought the new TV set and and cabinet to set it on and then ordered 3 custom shelves from you which I planned to have my contractor install into the armoire. My contractor installed them yesterday and it turned out just perfectly. The shelves fit in perfectly and I really love it. I now have a place to store away out of sight my scanner/printer and lots of other office 'stuff' too. But still the printer is so easy to get to - it is just perfect. The armoire had doors that slide back and stored inside the cabinet. So my contractor fixed them in place so they no longer slide - but still open and close - by running screws through the carrier piece into the side of the cabinet. He then built out the sides of the cabinet so the drawers clear the doors and hinges and voila - I have a lovely piece of furniture that perfectly matches the other pieces in the room - all for the price of three drawers. What a great product you offer!
Lynn U | January 23rd, 2015
I ordered the shelves for my 82yr old Mother. They were delivered quickly, were well packed and easily installed. Your product is well made and added tremendously to the quality of my Mother's life. Thank you for your time and consideration.
Jim | January 21st, 2015
Your products have been fantastic. We started off by ordering 2 shelves about 2 months ago. After we received and installed them, my wife and I started thinking of other places we could use them. Long story short, we will have installed 7 of them when we receive or latest order. Your products are well-built and easy to install.
Todd H | February 2nd, 2013
I just installed the second set of shelves. You make a great product and I will recommend it to all who ask
Eric A | May 30th, 2021
My wife and I were searching for pre-made storage solutions for some of our harder to access kitchen cabinets. I searched the home improvement outfits online, and found nothing suitable. Then we visited the typical home accessory stores, but were disappointed again. For one, everything was made in, you guessed it, China, and secondly we would have had to compromise in some way in shape, size, or function. I was about resigned to dragging out my router and carpenter's glue when I stumbled upon your website! WOW! Custom made, AMERICAN made, and with a custom tolerance down to a 1/6th of an inch! Just what the doctor ordered. Seemed a bit expensive to me at first, but when I added up the materials I would need, and the tools I would need to drag out, and the skills I would need to re-familiarize myself with, these shelves were indeed a bargain. I ordered two shelves to solve our immediate storage issue, and then waited for them to arrive. If the quality was all it was said to be, I would be ordering more. The shelves were stated to arrive in 2 to 3 weeks, so I was resigned to be patient. Then, I was pleasantly surprised when the shelves arrived in only 9 days! WOW again! My first impression was your packaging! WOW, three times. Each shelf was carefully wrapped in stretch wrap, then all shelves were wrapped in stretch wrap, then the whole thing wrapped in bubble wrap, then enclosed in a heavy cardboard box with additional Styrofoam to protect the edges and corners. You take no chances in your product reaching its destination undamaged! Now, being an electronic engineer by trade, I typically don't read instructions, but prepared to approach the installation with careful measurement tools and deliberate care. After 15 minutes of this overly cerebral approach, I finally glanced at the directions. Two minutes later I had secured some masking tape from the shop and tacked the sliders down to my shelf. A few twists of the screwdriver and voila! Shelf installed. The second shelf too just 5 minutes. Sometimes it is better not to over-think these things. We now have a functional space that we can now use efficiently, in place of the deep, dark, unusable pit we had before. WOW, and WOW! My wife arrived home and rewarded me with a lovingly stated "my hero", to which I took my customary bow. I have just now ordered another smaller shelf that will become a new kitchen drawer, and then, just underneath your dual 27" trash slider. These two items will fit in the opening once occupied by our long defunct trash compactor, and add the utility of a drawer, as well as hide away our current trash and recycle bins. I am looking forward to another easy custom installation, and another "my hero" from my honey! It is refreshing to know there are still companies that take pride in producing a quality product, made in the USA.
Frank | March 13th, 2013
Before we were always "losing" items that were in the back of the pantry. Things were made more complex since part of the pantry was cut out to make room for a clothes shoot. To keep the installation simple, I used the existing shelves, added 1x3 side rails to attach your shelves to and in a few hours the problems of lost pantry items were resolved. I priced out a professional installer and they wanted $1300 to accomplish the same thing.
David T | January 27th, 2023
The replacement shelf came today and is in perfect order. Thanks so much for your response.
Anonymous | February 12th, 2017
Today we received our shelves. I have only installed one so far, but will complete the task tomorrow. I'm impressed with the construction of the shelves, the shipping box in which they were sent, and the price we've paid.
Write A Review