Help Guides, Measuring Guide, Measuring Form |
Description
Less expensive than the premium shelves with the same great 9 ply Birch sides. No lacquer or joinery. We use the same 3/4 extension hardware as our Premium shelves. 9 ply Baltic Birch for the front, back, and sides of our new line pull out shelves. The maximum width for our NewLine shelves is for a 26" opening.
[FX] Slides in limited supply
What's Included:
• Custom Pullout Shelf • Complete set of the selected Slides • Mounting Hardware for the selected Mounting Style • 1 or 2 Door Protectors per shelf (under 19" wide gets 1) • 10 Wood Mounting Screws per shelf (5/8" long) |
Clear Opening Width
The available space between the most narrow 2 points of your cabinet's opening, at the level the shelf will be installed. Between any protruding hinges, doors, face frames, etc.
It is typical for the lower pullout shelf to be slightly narrow that the upper, due to the hinges usually only interfering with the bottom. If you have a Frameless Cabinet,
you may need to deduct for the L Brackets used by the Base or Half Shelf Mounting Styles.
Do not measure existing pullout shelves or drawers to obtain the Clear Opening Width
Shelf Depth
Select the Shelf Depth that would fit inside of your available cabinet interior depth, behind any doors or framing. This is the actual length of the pullout shelf. The Rear Socket Mounting Style
may add 1/4" more to the Shelf Depth selection, so please allow for 1/4" Extra room when ordering to be safe.
Do not select the Depth size larger than your interior cabinet depth.
Mounting Styles
Base Mount | Mounting on top of any existing surface, i.e. Bottom/Floor of cabinet, Full Fixed/Adjustable Shelf. |
Half Shelf Mount | Utilizing the pesky Half Shelf in the back of the cabinet, or an existing shelf that's more than 2" shorter than the cabinet depth. |
Side Mount | For mounting an upper shelf with no existing fixed/adjustable shelf. Would attach to the interior sidewalls using a form of Spacer or Wood Strip so the pullout can be narrow enough to slide through the opening. |
Rear Socket Mount | Similar to the Side Mount, only the Rear of the shelf will be attached to the cabinet's back wall. |
The Half Shelf, Side Mount, and Rear Sockets Mounting Styles all attach to the Face Frame or Sides of the cabinet on the front, the rear attachment is all that changes. |
We do not automatically include spacers. They can be found in our Hardware Section
You can find more information on our different Mounting Styles HERE.
You can find more information on our different Mounting Styles HERE.
[FX] Slides in limited supply
Your shelf is custom made to order in the USA usually ships in 1 - 2 weeks.
FREE U.S. Shipping Custom Shelf Orders Over $750 *
Excludes HI & AK
Specifications | |
Height | 2 5/8" |
Depth | From 11 3/4" to 25 3/4" (2" increments) |
Capacity | 75 lbs. |
Wood | 1/2" 9-Ply Birch sides / 1/4" Birch bottom |
Finish | No Lacquer |
Joints | Butt Joint corners/bottom |
Warranty | 2 Years |
If you have any questions on measuring, mounting, or ordering please emails us at [email protected] or call us at 1-800-598-7390
4.88/5 Stars out of 80 Reviews
0
0
0
10
70
JOE C | July 2nd, 2012
They arrived yesterday evening, beautiful sir, thank you will share your service with other in the area
Gayle | January 16th, 2014
I received my shelves and already have them installed. Thank you so much for all your help
Jim Y | November 14th, 2015
Finished installing 22 base and shelf mount units. All were received as ordered, with all required parts in great condition. Quality is very good. I found it very useful to make some spacing jigs out of plywood to get the spacing correct between the tracks. This might be an item you could sell as an option to the shelves. Just ordered 3 more for my shop work bench. I may reinforce bottoms for this heavy duty application although I really don�t think it is probably needed.
Tracy W | February 10th, 2018
I'm sure you've received many thank you's over the years from happy customers about how their new shelves "changed their lives". Please count this as another! We received our shelves last week and installed them over the weekend. Already, they have made such a difference! Thank you again for being so willing to work with me to custom cut one of them. I really appreciate the way the tall sides are cut back from the short side to ease the transition and appearance. And my cereal-loving husband appreciates that he can stock up without consuming all the space in the cabinet as well as reach the boxes more easily. :-) I've attached some photos to show you how our awkward corner pantry has become much more efficient and organized due, in large part, to shelves that slide!
Teresa F | February 13th, 2022
I ordered only 3 initially, because I wasn't sure how well it would work. I ordered the next set when I saw how easy it was! Very well packaged, and they look wonderful. The hint about using tape on the bottom of the rail brackets was brilliant! I discovered a couple more uses for tape- I used tape to hold the rails to the drawer when trying to set it up, and folded it back so I could remove it when it was time to slide out the drawer. Was very helpful in tight quarters. I also used tape to hold the "feet" down, and in place, so I didn't accidentally move it while taking the drawer in and out. Even with the tape on the bottom, they extra helped keep me from bumping it out of position. If doing 2 shelves in the same cupboard- do the bottom one first. To do the top one, determine the level you will place it, and then drop it on top of the bottom shelf to install the shelves. Do not take it out! Many cupboards are very tight, and you might not be able to get the shelf back in with the rails on it. All you have to do is lift the shelf up and put the holders in place when done. This is such a quality product, and they fit beautifully! I am looking around for where I can install more! Thanks again for such a quality product, with excellent instructions.
Jim A | May 31st, 2020
I was very pleased with last shelves. I installed a sliding barn door over the pantry which was the old furnace room I converted the two back L brackets in place. I used the center hole because I did not need to make any adjustments. The extender then allowed me to screw down the front two L brackets. This may be unique case for bottom shelf but putting it all together first save headaches & buying extender proved to be critical. Great craftsman ship.
Guy J | January 24th, 2023
I finally got around to installing your shelves. The closet that I was to reno was a little tricky as nothing in this house is completely square. I used the large spacers on the front right side with much longer screws. This gave me a slight angle that I needed in order to be able to slide the shelves completely open as the cupboard door backs up to a sliding door, and does not open to a complete 90�. Anyhow, other than a little paint or stain, the job is complete! Attached a few pics. Thanks for your help Steve and I will certainly keep you in mind for any future needs.
Georgette W | December 23rd, 2018
Perfect fit, thank you
Don and Pat | July 11th, 2019
Just wanted to let you know how pleased my husband and I are with the sliding shelves we ordered. We needed 9 of them for a tall, narrow and deep kitchen pantry. We first ordered only 2 so we could check out the quality of construction. They are very well made of excellent quality and reasonably priced. We therefore ordered 7 more. We highly recommend your company for quality, service and affordable cost. Since we aren't professional installers, we decided it would be best to use the base mount method of installation on top of full shelves, as it seemed easier to get accurate measurements on our euro cabinet and side mounting seemed like it would be much more difficult. I included two pics of them with my husband proudly displaying them, since he did most of the installation with minimal assistance from me. One with shelves fully extended open and one with them closed. Thanks again for a great custom made product. I absolutely love being able to reach and organize everything in this cabinet now that I can pull out the shelves.
Dan and Linda S (River Falls, WI) | December 2nd, 2018
HI Steve, I wanted to let you know that we received our sliding shelves yesterday. They were in great shape, due to a great packing job. I installed them right away, and they work great . . Only took me about 40 minutes to put them in my Pantry cabinet. The fit was perfect also. Just wanted to say Thanks ,and let you know it was money well spent.
Write A Review