Help Guides, Measuring Guide, Measuring Form |
Description
Our least expensive shelf with no sides, great for computer and video storage. No door protectors needed as front trim is wider that the shelf. Includes Oak or Maple hardwood front accents of your choice! Bottom is 5/8" thick melamine with a 2" tall plywood strip on the rear of the shelf. The maximum width for the economy shelves is for a 24" opening. The exception is when they will be used for a keyboard tray and the weight is minimal. Order base mount for keyboard tray and reverse the L brackets to hang from a flush desktop.
Mounting Half Shelf or Rear Socket styles: The shelf must be set back from the cabinet face because the wood front accent extends 1/2" further than the slides
What's Included:
• Custom Pullout Shelf • Complete set of the selected Slides • Mounting Hardware for the selected Mounting Style • 10 Wood Mounting Screws per shelf (5/8" long) |
Clear Opening Width
The available space between the most narrow 2 points of your cabinet's opening, at the level the shelf will be installed. Between any protruding hinges, doors, face frames, etc.
It is typical for the lower pullout shelf to be slightly narrow that the upper, due to the hinges usually only interfering with the bottom. If you have a Frameless Cabinet,
you may need to deduct for the L Brackets used by the Base or Half Shelf Mounting Styles.
Do not measure existing pullout shelves or drawers to obtain the Clear Opening Width
Shelf Depth
Select the Shelf Depth that would fit inside of your available cabinet interior depth, behind any doors or framing. This is the actual length of the pullout shelf. The Rear Socket Mounting Style
may add 1/4" more to the Shelf Depth selection, so please allow for 1/4" Extra room when ordering to be safe.
Do not select the Depth size larger than your interior cabinet depth.
Mounting Styles
Base Mount | Mounting on top of any existing surface, i.e. Bottom/Floor of cabinet, Full Fixed/Adjustable Shelf. |
Half Shelf Mount | Utilizing the pesky Half Shelf in the back of the cabinet, or an existing shelf that's more than 2" shorter than the cabinet depth. |
Side Mount | For mounting an upper shelf with no existing fixed/adjustable shelf. Would attach to the interior sidewalls using a form of Spacer or Wood Strip so the pullout can be narrow enough to slide through the opening. |
Rear Socket Mount | Similar to the Side Mount, only the Rear of the shelf will be attached to the cabinet's back wall. |
The Half Shelf, Side Mount, and Rear Sockets Mounting Styles all attach to the Face Frame or Sides of the cabinet on the front, the rear attachment is all that changes. |
We do not automatically include spacers. They can be found in our Hardware Section
You can find more information on our different Mounting Styles HERE.
You can find more information on our different Mounting Styles HERE.
Mounting Half Shelf or Rear Socket styles: The shelf must be set back from the cabinet face because the wood front accent extends 1/2" further than the slides
Your shelf is custom made to order in the USA usually ships in 1 - 2 weeks.
FREE U.S. Shipping Custom Shelf Orders Over $750 *
Excludes HI & AK
Specifications | |
Capacity | 75 lbs. |
Depth | From 12 1/4" to 26 1/4" (2" increments) |
Wood | 5/8" Melamine Bottom & Oak / Maple Front Trim |
Warranty | 2 Years |
If you have any questions on measuring, mounting, or ordering please emails us at [email protected] or call us at 1-800-598-7390
4.85/5 Stars out of 47 Reviews
0
0
0
7
40
Marge | December 6th, 2023
Thank you so much for the wonderful shelves that slide. I have a bad knee and was having a difficult time reaching items stored under my counter. With the sliding shelves, it's a snap! You product is very worthwhile and very well made.
Fred S | June 8th, 2019
A few months ago I bought a couple of slides from you guys to install in my kitchen. You not only sent the right slides but all the hardware and some good instructions. After that nice surprise I decided to buy seven more slides for the kitchen and bathrooms. Once again the slides all fit, I got plenty of hardware, the drawers were excellent and I am completely satisfied. The reason I am writing is that I don't normally get such good service when I buy stuff off the net. I used duct tape to position the slides before screwing them into place which seemed to work well. Also, I have a 90 degree offset attachment for my drill motor which was extremely handy for screwing down the slides in a few tight spots. My oldest daughter just bought a new house and is trying to convince me to install your slides and drawers in the new home. If she is successful,,,I'll be back!!!
Rinaldi | March 30th, 2014
I received your shelves yesterday and installed them. Your product is everything you advertise them to be. They were of high quality and easy to install. I thank Mark for his help and appreciate a good product
Laurel P | December 14th, 2020
This was actually the fourth time we have ordered from you. We have purchased and installed your shelves in our last 3 houses and have always been very pleased with the quality and price. We have had you ship them to us in California, Chicago and just received the new ones here in New Mexico. Every time they have come through shipment in perfect condition.
Rick | July 25th, 2021
Loved the first shelves, installed in minutes. Should have done this years ago. Waiting for next 4 shelves!
Eva S | August 14th, 2023
I just want to tell you that we received our shelves and we absolutely love them. You did a fantastic job.
Mark (Seattle, WA) | January 14th, 2022
Web site easy to browse, easy to order. Order to delivery in under four weeks, even with Christmas and New Year holidays. (Just as said in web site estimate. "Ships in about two to three weeks from order date.") Shelf very well packed, perfect condition, perfect dimensions, detailed instructions, plenty of screws, installed in about 30 minutes.
Joanna G (Denver, CO) | April 17th, 2012
Our custom sliding shelves are of exceptional quality, as promised.
Doug (Oro Valley, AZ) | May 27th, 2023
I received the 17 shelves yesterday, and have 12 installed now. That's in addition to those first four you made for me which was my "test" order. Ya did good. The shelves fit, there's lots of mounting hardware, the instructions are very good....Oh yes, on that point : - We recently purchased some wooden blinds for this new house, and the instructions said things like "choose the mounting position for the mounting brackets and mount them". Huh ? HOW ? Your instructions say HOW ! Great....thanks. - My upper shelves are the hardest to mount, I find. They're all half shelf supports, hardwood, and there's not much working space. I found it easier if , instead of screwing the backs in place as directed, I first used a pencil to mark the rear bracket location (after following your directions on the front brackets of course !) , then drilled guide holes for the screws, then screwed the rear L brackets down. I just couldn't get enough leverage to start the screws without first drilling the guide holes. The order is correct too... (this time!) All the right shelves and mounting kits, lots of 1/8" spacers, and I like the nylon door guards. So...totally satisfied. Thanks for the help in upgrading our kitchen.
Dave | November 10th, 2016
I have to tell you this is best experience I have ever had with ordering ANYTHING and especially dealing with the trades/contractor...I use to be a painting contractor and I know how ridiculous things can get between customer and contractor...so far you guys are by far the most professional, most helpful and the most INTELLIGENT people I have ever worked with...period.
Write A Review